quit

WECON LX3VM Series PLC

  • DESCRIPTION

  • KEY SPECIFICATION

  • PRODUCT MANUAL

  • GET QUOTE

Wecon PLC now add the function of circular interpolation. Moving a tool along an arc from X to Y with acceptable accuracy is called Circular interpolation. This moving speed controls the speed for each axis so that they can be the defined speed on the defined arc.

Feature:-

  • Up to 4 channels independent 200 KHz high speed pulse output are supported,4 channel can be used simultaneously.
  • Supports 32k steps ladder diagram.
  • Three axis liner interpolation (Y0, Y1,Y2) and two axis circular interpolation are supported.
  • Support Jitter pulse output.

Specification

◇I/O -    14-26, 32-64

◇CPU: STM32 CPU, A: AC100-240V power, D: DC24V power. 20W rated power

◇Port:2 serial ports (RS422/RS485, RS485), 2 BD board supported.
◇Protocol:  FX2N NO PROTOCOL, LX3VE PROTOCOL
◇Support 32K-step ladder.
◇Support N: N network, one PLC could connect eight PLCs;
◇T50~T191 can be changed to 1ms timers by M8028
◇support S-type acceleration/deceleration, the time for acceleration and deceleration is independent
◇Shaking pulse output supported
◇E-CAM supported

◇Circular Interpolation Supported