quit

Yudian AIJK SCR THYRISTOR FIRING DEVICE

  • DESCRIPTION

  • KEY SPECIFICATION

  • PRODUCT MANUAL

  • GET QUOTE

AIJK SERIES SCR (THYRISTOR) FIRING DEVICE

 

  • 0-20mA (0-5V) / 4-20mA (1-5V) signal inputs are selectable.
  • Linearizing power adjusted by computer technology. When the load is resistive, its output power is proportional to input signal.
  • Phase failure and over-shoot checking and alarming. In addition, AIJK3 can check thyristor shoot-through and load open circuit.
  • Automatic synchronization. Not necessary to check the sequence of thyristor trigger wires. For AIJK3, even the electric polarity is not needed to check.
  • Application of complete electric isolation cheap replica handbags and “burnt proof” technology. It is very reliable, and has little interference to input terminals.
  • Soft-start / soft-stop function with current feedback and adjustable delay time.
  • Suitable for MoSi2 heating elements, tungsten filaments, electromotors, and inductive loads.
  • Equipped with on-off power, which be directly supplied by 220VAC power, and can provide two groups of 5VDC and 24V DC outputs.
  • Indication of RUN and ALARM Current F/B limit swiss replica watches and Overshoot alarm
  • Phase failure alarm Linearized power output

Control Input

: 0~20mA(0~5V), and 4~20mA(1~5V) Signal inputs are

  selectable

Trigger Output

: Linear Phase Angle Fired output (Designed up to 300A)

Alarm

: Phase failure and over shoot checking and alarming

Power Supply

: 220VAC, 50 Hz

Output source (Built-In)

: 5V and 24V DC

Soft Start/Soft Stop Time

: 1-41Seconds

Size

: 80x150x35 (DIN Rail mounted)

Operating Ambient

: Temp.: 10°C~60°C‚
: Humidity: <90%RH